Replace Bearing in Dryer: A Comprehensive Guide to Fix Your Noisy Appliance

Is your dryer making a loud, grinding noise? It's likely that it's time to replace the bearing. This is a relatively simple repair that can be completed in a few hours. Here's a comprehensive guide to help you get started.

Why Replace Bearing in Dryer Matters

A faulty dryer bearing can lead to several problems, including:

• Increased noise
• Reduced dryer efficiency
• Shorter lifespan of the appliance

According to the U.S. Department of Energy, a faulty bearing can increase dryer energy consumption by up to 15%.

Key Benefits of Replace Bearing in Dryer

Replacing a faulty bearing in your dryer offers several benefits, including:

• Reduced noise: A new bearing will eliminate the grinding noise that is coming from your dryer.
• Improved efficiency: A properly lubricated bearing will allow your dryer to run more smoothly and efficiently.
• Extended lifespan: Replacing a faulty bearing can help to extend the lifespan of your dryer.

6 Effective Strategies, Tips and Tricks to Replace Bearing in Dryer

1. Gather your tools: You will need a screwdriver, a socket wrench, and a new bearing.
2. Unplug the dryer: Before you begin working on your dryer, be sure to unplug it from the power outlet.
3. Remove the back panel: The back panel of the dryer is usually held in place by a few screws. Remove the screws and set the panel aside.
4. Remove the drum: The drum is held in place by a belt. Remove the belt and then pull the drum out of the dryer.
5. Remove the bearing: The bearing is located on the back of the drum. Remove the screws that hold the bearing in place and then pull the bearing off.
6. Install the new bearing: Place the new bearing on the back of the drum and secure it with the screws.
7. Reassemble the dryer: Reinstall the drum, the belt, and the back panel. Plug the dryer back in and test it to make sure it is working properly.

Common Mistakes to Avoid When Replacing Bearing in Dryer

• Using the wrong bearing: Be sure to use the correct size and type of bearing for your dryer.
• Installing the bearing incorrectly: The bearing should be installed flush with the back of the drum.
• Overtightening the screws: Overtightening the screws can damage the bearing.
• Not lubricating the bearing: Lubricate the bearing lightly with a high-temperature grease before installing it.

Pros and Cons of Replace Bearing in Dryer

Pros:

• Reduces noise
• Improves efficiency
• Extends lifespan

Cons:

• Requires some mechanical skill
• Can be time-consuming
• Parts can be expensive

Making the Right Choice: When to Replace Bearing in Dryer

If your dryer is making a loud, grinding noise, it's likely that the bearing needs to be replaced. Here are some additional signs that it may be time to replace the bearing:

• The dryer is not drying clothes as efficiently as it used to.
• The dryer is running for longer than usual.
• The dryer is vibrating excessively.

If you're not comfortable replacing the bearing yourself, you can hire a qualified appliance repair technician to do it for you.