Harley Davidson Wheel Bearing Puller Guide: The Ultimate Resource

Introduction

The Harley Davidson wheel bearing puller is an essential tool for any motorcycle enthusiast. It allows you to safely and easily remove wheel bearings from your Harley Davidson motorcycle. Wheel bearings are a critical part of your motorcycle's drivetrain, and it is important to keep them in good condition.

Why Use a Harley Davidson Wheel Bearing Puller?

There are several benefits to using a Harley Davidson wheel bearing puller:

• Safety: Using a puller is much safer than trying to remove wheel bearings by hand. The puller helps to prevent the bearings from slipping and causing injury.
• Convenience: A puller makes it easy to remove wheel bearings, even if they are seized or rusted in place.
• Accuracy: A puller ensures that the bearings are removed evenly and without damage.

Types of Harley Davidson Wheel Bearing Pullers

There are two main types of Harley Davidson wheel bearing pullers:

• Mechanical pullers: These pullers use a threaded screw to apply force to the bearing. They are the most common type of puller and are relatively inexpensive.
• Hydraulic pullers: These pullers use hydraulic pressure to remove bearings. They are more expensive than mechanical pullers, but they are also more powerful.

How to Choose the Right Harley Davidson Wheel Bearing Puller

When choosing a Harley Davidson wheel bearing puller, consider the following factors:

• The size of the bearings you need to remove. Pullers come in different sizes, so it is important to choose one that is the right size for the bearings you need to remove.
• The type of bearings you need to remove. There are different types of bearings, so it is important to choose a puller that is designed to remove the type of bearings you have.
• The budget you have. Pullers range in price from $20 to $200. Choose a puller that fits your budget.

How to Use a Harley Davidson Wheel Bearing Puller

Using a Harley Davidson wheel bearing puller is relatively simple. Follow these steps:

1. **Remove the wheel from the motorcycle.
2. **Identify the bearing you need to remove.
3. **Attach the puller to the bearing.
4. Tighten the screw on the puller to apply force to the bearing.
5. **Remove the bearing from the motorcycle.

Tips and Tricks for Using a Harley Davidson Wheel Bearing Puller

Here are a few tips and tricks for using a Harley Davidson wheel bearing puller:

• Use a penetrating oil to loosen seized bearings.
• Tap the bearing with a hammer to break it loose.
• Be careful not to damage the bearing or the surrounding components.

Stories

Story 1

I was once working on my Harley Davidson when I realized that the wheel bearings needed to be replaced. I didn't have a wheel bearing puller, so I tried to remove the bearings by hand. Big mistake. The bearings were seized in place, and I ended up damaging them and the surrounding components. I had to take my motorcycle to a mechanic to have the bearings replaced.

What I learned: Always use a wheel bearing puller to remove wheel bearings.

Story 2

I was once riding my Harley Davidson when I hit a pothole. The impact caused one of the wheel bearings to fail. I was able to get the motorcycle home, but I needed to replace the bearing before I could ride it again. I went to the store and bought a wheel bearing puller. I was able to remove the failed bearing and replace it with a new one in about an hour.

What I learned: A wheel bearing puller is a valuable tool to have on hand.

Story 3

I was once working on my Harley Davidson when I dropped a wheel bearing. The bearing rolled under the motorcycle and I couldn't find it. I spent hours looking for the bearing, but I couldn't find it anywhere. I finally gave up and ordered a new bearing.

What I learned: Always keep track of your wheel bearings.

Tables

FAQs

• What is a wheel bearing puller?

A wheel bearing puller is a tool that is used to remove wheel bearings from motorcycles.

• Why do I need a wheel bearing puller?

A wheel bearing puller is necessary if you need to replace wheel bearings on your motorcycle.

• What are the different types of wheel bearing pullers?

There are two main types of wheel bearing pullers: mechanical and hydraulic.

• How do I use a wheel bearing puller?

To use a wheel bearing puller, remove the wheel from the motorcycle, identify the bearing you need to remove, attach the puller to the bearing, and tighten the screw on the puller to apply force to the bearing.

• Where can I buy a wheel bearing puller?

You can buy a wheel bearing puller at most motorcycle parts stores.

• How much does a wheel bearing puller cost?

Wheel bearing