XG1 2015-20 Acura Connecting Rod Bearing Stop Sale: What You Need to Know

Introduction

In 2021, Acura issued a stop-sale order for certain model years of the XG1 due to a potential issue with the connecting rod bearings. This issue has the potential to cause serious engine damage if not addressed promptly.

Affected Vehicles

The stop-sale order affects the following model years of the Acura XG1:

• 2015
• 2016
• 2017
• 2018
• 2019
• 2020

Cause of the Issue

The issue is believed to be caused by a manufacturing defect in the connecting rod bearings. These bearings are responsible for connecting the pistons to the crankshaft, and they are subjected to high levels of stress during engine operation. In some cases, the bearings may fail prematurely, leading to catastrophic engine damage.

Symptoms of the Issue

The symptoms of a failed connecting rod bearing can include:

• Knocking or ticking noises from the engine
• Loss of engine power
• Increased oil consumption
• Engine overheating

What to Do If Your Vehicle Is Affected

If you own an Acura XG1 that is included in the stop-sale order, it is important to take the following steps:

1. Contact your Acura dealer immediately to schedule an inspection.
2. Do not drive your vehicle until it has been inspected and repaired.
3. If your vehicle experiences any of the symptoms listed above, pull over to a safe location and turn off the engine immediately.

Repair Process

Acura has developed a repair procedure to address the issue with the connecting rod bearings. The repair involves replacing the defective bearings and inspecting the engine for any other damage. The repair time will vary depending on the severity of the issue.

Cost of the Repair

The cost of the repair will be covered by Acura under warranty. However, customers may be responsible for a deductible, depending on their coverage.

Safety Concerns

The issue with the connecting rod bearings is a serious safety concern. A failed bearing can cause the engine to seize up, which can lead to a loss of control of the vehicle. It is important to have your vehicle inspected and repaired as soon as possible if it is included in the stop-sale order.

Conclusion

The Acura XG1 connecting rod bearing stop-sale order is a serious issue that can have significant consequences for owners. It is important to be aware of the affected vehicles and to take the necessary steps to prevent engine damage.

Humorous Stories

Story #1

A man takes his Acura XG1 to the dealer for a routine oil change. The mechanic notices a strange noise coming from the engine and asks the customer if he has been experiencing any problems. The customer says that he has not noticed anything unusual. The mechanic proceeds with the oil change, but as he is tightening the drain plug, he hears a loud bang. The engine has seized up. The customer is shocked and asks what happened. The mechanic explains that the connecting rod bearings have failed. The customer is relieved that the issue was caught before it caused any major damage.

Lesson Learned: It is important to have your vehicle inspected regularly by a qualified mechanic.

Story #2

A woman is driving her Acura XG1 on the highway when she suddenly hears a loud knocking noise from the engine. She pulls over to the side of the road and turns off the engine. She calls her husband and tells him what happened. He tells her to call a tow truck and have the car taken to the dealer. The dealer diagnoses the issue as a failed connecting rod bearing. The woman is upset that her car has to be repaired, but she is grateful that she was not injured.

Lesson Learned: If you hear any strange noises coming from your engine, pull over to a safe location and turn off the engine immediately.

Story #3

A man is driving his Acura XG1 to work when he suddenly loses all power. He pulls over to the side of the road and tries to restart the engine, but it will not start. He calls a tow truck and has the car taken to the dealer. The dealer diagnoses the issue as a failed connecting rod bearing. The man is angry that his car has to be repaired, but he is grateful that he was not in an accident.

Lesson Learned: If your engine loses power suddenly, pull over to a safe location and turn off the engine immediately.

Common Mistakes to Avoid

• Do not ignore any strange noises coming from your engine.
• Do not continue to drive your vehicle if it experiences a loss of power.
• Do not attempt to repair the issue yourself.

Pros and Cons

Pros:

• The repair is covered under warranty.
• The repair is relatively quick and easy.
• The issue is not likely to cause any permanent damage to the engine.

Cons:

• The repair may require a deductible.
• The issue can be a safety hazard if not addressed promptly.
• The issue may affect the resale value of the vehicle.

FAQs

Q: What is a connecting rod bearing?
A: A connecting rod bearing is a bearing that connects the piston to the crankshaft.

Q: What causes a connecting rod bearing to fail?
A: Connecting rod bearings can fail due to a manufacturing defect or excessive wear and tear.

Q: What are the symptoms of a failed connecting rod bearing?
A: Symptoms of a failed connecting rod bearing can include knocking or ticking noises from the engine, loss of engine power, increased oil consumption, and engine overheating.

Q: What should I do if I experience any of the symptoms of a failed connecting rod bearing?
A: If you experience any of the symptoms of a failed connecting rod bearing, pull over to a safe location and turn off the engine immediately.

Q: How is a failed connecting rod bearing repaired?
A: A failed connecting rod bearing is repaired by replacing the defective bearing and inspecting the engine for any other damage.

Q: Is the repair cost covered under warranty?
A: The repair cost is covered by Acura under warranty.

Call to Action

If you own an Acura XG1 that is included in the stop-sale order, contact your Acura dealer immediately to schedule an inspection. Do not drive your vehicle until it has been inspected and repaired.