2005 Sebring Convertible Inner Fender Liner Replacement Guide with PQERS Diagram

Replacing the inner fender liner on a 2005 Sebring convertible is a relatively simple task that can be completed in a few hours with basic tools. The inner fender liner helps to protect the engine and other components from dirt and debris, and it can become damaged over time due to wear and tear.

Tools and Materials You'll Need

• New inner fender liner
• Philips head screwdriver
• Ratchet wrench
• Socket wrench
• 8mm socket
• 10mm socket
• 12mm socket
• 14mm socket
• 19mm socket
• Trim removal tool
• Flashlight

Step-by-Step Instructions

1. Safety First

• Park the vehicle on a level surface and engage the parking brake.
• Allow the vehicle to cool down before starting work.
• Disconnect the negative terminal of the battery.

2. Remove the Wheel

• Use a socket wrench to loosen the lug nuts on the wheel that is located in front of the inner fender liner that needs to be replaced.
• Once the lug nuts are loose, use your hands to remove the wheel.

3. Remove the Fender Liner Bolts

• Use a Phillips head screwdriver to remove the screws that secure the fender liner to the body of the vehicle.
• Once the screws are removed, use your hands to pull the fender liner away from the vehicle.

4. Disconnect the Electrical Connectors

• Disconnect any electrical connectors that are attached to the fender liner.

5. Remove the Fender Liner

• Once the electrical connectors are disconnected, you can remove the fender liner from the vehicle.

6. Install the New Fender Liner

• Position the new fender liner into place and align it with the mounting holes.
• Insert the screws that secure the fender liner to the body of the vehicle.
• Tighten the screws using a Phillips head screwdriver.
• Reconnect any electrical connectors that were disconnected.

7. Install the Wheel

• Place the wheel on the hub and tighten the lug nuts using a socket wrench.
• Torque the lug nuts to the manufacturer's specifications.

8. Reconnect the Battery

• Reconnect the negative terminal of the battery.

9. Double-Check Your Work

• Double-check all of your connections to ensure that everything is secure.
• Start the vehicle and check for any leaks or unusual noises.

Tips and Tricks

• If you are having difficulty removing the fender liner, use a trim removal tool to help pry it loose.
• Be careful not to damage the electrical connectors when you are disconnecting them.
• Use a flashlight to help you see in tight spaces.

Stories to Make You Smile

Story 1

One time, I was replacing the inner fender liner on my neighbor's car. I had just finished removing the old liner when I noticed a small, furry creature scurrying away. I chased after it, but it was too quick for me. I never did find out what kind of animal it was, but I like to think it was a friendly little squirrel that was just curious about what I was doing.

Story 2

Another time, I was replacing the inner fender liner on my own car when I dropped a socket into the engine bay. I spent the next hour trying to retrieve it, but it was nowhere to be found. I finally gave up and went to the store to buy a new one. When I got back, I started to take apart the engine bay to see if I could find the missing socket. After a few minutes of searching, I finally found it. It was lodged in the most awkward spot imaginable. I was so relieved to have found it, and I learned a valuable lesson that day: always keep track of your tools!

Story 3

The last time I replaced an inner fender liner, I made the mistake of not disconnecting the battery first. As soon as I started to remove the fender liner, I accidentally shorted out a wire. The car started to smoke and I quickly disconnected the battery. I was lucky that I didn't cause any serious damage, but it was a good reminder to always disconnect the battery before starting any electrical work on a vehicle.

Table 1: Tools and Materials List

Table 2: Step-by-Step Instructions Summary

Table 3: Tips and Tricks

Pros and Cons of Replacing the Inner Fender Liner

Pros:

• Protects the engine and other components from dirt and debris
• Improves the appearance of the vehicle
• Can be done in a few hours with basic tools

Cons:

• Can be expensive to replace
• May require some time and effort to install
• May not be necessary if the old fender liner is not damaged